Newbie here, trying to get this Toro S200 snowthrower to start. I know nothing about 2-stroke engines. Would not start (no spark or engine action) when I pulled the rope, so I changed the spark plug, squirting a little fuel mix into the hole before installing the spark plug. Pulled the rope and no action. I noticed that the starter drive gear was chipped and brittle. It was not engaged with the larger gear that spins when you pull the rope, so I pushed it until it engaged and then tried pulling the rope a few times. On one of my tries the engine revved, but quickly died.
Through all that, the starter drive gear broke (it was only a matter of time). I thought I would order a new one, but have a question: should that starter drive gear be engaged with the larger gear that spins when you pull the rope (don't know what it's called) when I pull the rope to start the engine? If so, what moves that starter drive gear laterally, because I had to move it manually to engage the larger gear?
Thanks for any help. Todd
20141208 001.jpg20141208 003.jpg20141208 004.jpg20141208 006.jpg
Through all that, the starter drive gear broke (it was only a matter of time). I thought I would order a new one, but have a question: should that starter drive gear be engaged with the larger gear that spins when you pull the rope (don't know what it's called) when I pull the rope to start the engine? If so, what moves that starter drive gear laterally, because I had to move it manually to engage the larger gear?
Thanks for any help. Todd
20141208 001.jpg20141208 003.jpg20141208 004.jpg20141208 006.jpg
Aucun commentaire:
Enregistrer un commentaire