Trying to figure out if I've gotten myself into a pickle.
I was making my first attempt at replacing the bearings on the mower deck ( 2004 Huskey Supreme 50" deck). I found out by accident about 3/4 of the way through that unlike the videos I watched on this process there are two spacers stacked on top of each other between the bearings. Needless to say during my hammering the lower spacer got flipped on its side and one end and the exterior got buggered up a bit.
Do I need to find another spacer or should it be alright as is since it seems to just float in place anyways.
I was making my first attempt at replacing the bearings on the mower deck ( 2004 Huskey Supreme 50" deck). I found out by accident about 3/4 of the way through that unlike the videos I watched on this process there are two spacers stacked on top of each other between the bearings. Needless to say during my hammering the lower spacer got flipped on its side and one end and the exterior got buggered up a bit.
Do I need to find another spacer or should it be alright as is since it seems to just float in place anyways.
Aucun commentaire:
Enregistrer un commentaire