I am having problems with my mower. I have to jump it across the solenoid to start it. This is not a big deal. The problem is that the battery does not stay up enough to start it, I put a new battery and cables on it last month. It started okay for a few weeks but now barely turns and won't start due to this. I try jump starting it and still the same problem. Is there another way I can get it to start by bypassing the battery and jumping it off? I am going to exchange the battery again tomorrow. This will be the third battery over since the end of March. I have had it on a trickle charge overnight but still not enough battery to start it. the trickle charger light continues to show that it is charging. In previous weeks it has charged and the light has gone off and I could start it.
Any ideas would be greatly appreciated. There is a thin black wire that has come off of somewhere, over the last weeks, so I can no longer use the key switch to start it. I pulled the ignition switch and found all wires in that harness to be okay. Being an old mower, I don't mind jumping off of the solenoid now. I have tried hooking up jumper cables directly to the red and black battery cables, unattached from the battery, but still don't get enough power to start the mower, just a slow turn.
Thanks!
Any ideas would be greatly appreciated. There is a thin black wire that has come off of somewhere, over the last weeks, so I can no longer use the key switch to start it. I pulled the ignition switch and found all wires in that harness to be okay. Being an old mower, I don't mind jumping off of the solenoid now. I have tried hooking up jumper cables directly to the red and black battery cables, unattached from the battery, but still don't get enough power to start the mower, just a slow turn.
Thanks!
Aucun commentaire:
Enregistrer un commentaire