I have a B&S V-Twin Nikki Carb #303447. Had to choke it to start it and leave the choke on to get it to run. Was blowing snow and the engine stopped. I sprayed carb cleaner in it, it would run until it ran out of carb cleaner fuel. So I pulled top off of carburetor and cleaned the jets and the stem from the carburetor top down (it has little holes in it). Float and float valve OK and working.
The engine will only start with carb cleaner sprayed in it. Gas line has gas, its filling the bowl and raising the float, and shutting the gas off. But, can't seem to get any gas from the float bowl to the engine.
I removed the idle jet screw with the spring on it and NO gas came out. Don't know if that's an error or gas needle.
Any help would be appreciated! Thanks!
Marv
The engine will only start with carb cleaner sprayed in it. Gas line has gas, its filling the bowl and raising the float, and shutting the gas off. But, can't seem to get any gas from the float bowl to the engine.
I removed the idle jet screw with the spring on it and NO gas came out. Don't know if that's an error or gas needle.
Any help would be appreciated! Thanks!
Marv
Briggs & Stratton V-Twin Nikki Carburetor #303447
Aucun commentaire:
Enregistrer un commentaire